One of the most annoying things about having a beautiful tile floor is the appearance of mold stains. If left unchecked, it will thicken and reduce the beauty of the ceramic. Help from the best lightweight carpet cleaner might help ease our worries a little. This should also be studied by homeowners so that they can overcome similar things in the future.
Here are some ways that you can apply to clean your tile floors:
First, the most common way to clean mold stains on ceramics is to brush them with chlorine bleach. The brush is dipped in liquid chlorine and then rubbed on the mold stain.
In the first rub, let the chlorine soak into the stain, let it sit for about 10-15 minutes, and then rub it vigorously until it’s clean. When you’re done, you can apply a solution of baking soda and water to the scrub.
The last step, mop the floor and make sure there is no cleaning liquid left on the floor. When doing this activity, also make sure your windows are open or the room is well ventilated.
Next, here’s what you can do if mold stains are very difficult to remove. For cleaning fluids, use a special cleaner for ceramic stains and choose the one with the strongest cleaning power. Make sure you open all windows and doors again so that the room has good air circulation. For protection, wear rubber gloves and eye protection to be safe.
How to use a special cleaning liquid to be effective when used is to apply the liquid on the mold stain, then let it soak for 45 minutes. After that, rub the stain again with the cleaning liquid vigorously.
When the above process has been completed, mop the floor thoroughly and make sure there is no remaining chemical liquid. Also, don’t let anyone into a cleaned room until the floor is completely dry.
Disadvantages of this technique, bleach usually contains toxic substances and its use can release harmful chemicals into the air. Over time, its use will make the color of the ceramic slightly change.
Carpet Care Specialists Mosman
50 Yeo St, Neutral Bay, NSW, 2089
(02) 8311 3724