One floor damage can occur due to the widening of the ground surface. This condition is due to pressure from the soil, it could also be due to the presence of gas, water content, and climate change. The surface of the floor in the house is cracked and damaging ceramics is annoying. To fix your house’s tiles, you can at Tile Cleaning Northern Beaches to get the perfect repair click site.
Damaged tiles will certainly interfere with your activities. Then what is the cause and how to overcome it?
To find out this case, the step that needs to be examined is knowing the cause first. Here are the reviews that you need to know.
The main cause that causes damage to floor tiles is the foundation of the house that is disturbed. This condition is usually unstable soil structure. It could be that conditions in the soil of the house were attacked by termites.
To prevent this, before building a house you must pay attention by spraying the soil with termites. Try to find out first the condition of the soil, is it vulnerable to termites? Strive for a land free from the presence of termites.
Meanwhile, to overcome the damage to the floor that is mild, you can patch the cracked area with a cement mixture, then cover again with tiles.
Other causes of floor damage can occur due to the widening of the ground surface. This condition is due to pressure from the soil, it could be due to gas, water content, temperature changes.
The trick is to prevent it, you should try to install the tiles when they are not too tight. This risk consideration aims to prepare the space if at any time the ground surface expands or widens.
Another thing that causes flood damage can occur due to the unbalanced material composition. It can also happen because the mixing process is not perfect, so the floor material cannot be bonded properly with tiles.
If it has happened like this, a step that can be done is to dismantle the floor layer. Prepare a mortar or stir a good cement, then reattach the tiles.
Look at the causes and their prevention
Another factor that can cause damage is the tiles that are not ready to be applied. Usually, before installing, the tiles should be soaked in water for about one hour. This immersion is intended so that later mortar dough can be easily bonded to the tiles.
Some high-quality tiles do not need to use this step. But for better prevention, you should do this step, rather than having bad consequences later.
Another factor could be the floor damage due to filling grout that is less than perfect. This happened because of rush work. As a result, not all grout is completely coated. The gap between the tiles has the potential to fill with air or cause water seepage, so the bottom layer of the tiles is damaged and cracked.
Not only that, but hot climatic conditions can also result in easy floor expansion. Usually, if floor tiles are not of good quality, they will be easily affected by temperature, the floor will expand.
To prevent this, consider choosing quality tiles, so they don’t swell easily and eventually break. Do a good installation. If necessary, supervise the work of the handyman during the process of work, these tips to minimize the occurrence of things that are not desirable.
Fresh & Healthy Carpet Cleaning Northern Beaches
7 Grosvenor Pl, Brookvale NSW 2100
(02) 8311 0671